ajax ... nettuts

13.01.2017

Checking and calibration of gas analyzers any types and models

Checking and calibration of gas analyzers

The calibration of the gas analyzer is understood as an adjustment of its readings on the calibration gas mixtures with a known content of the components to be determined.

The main reason for changingthe readings of gas analyzers during operation is a gradual decrease in the sensitivity of the gas sensors used in the instruments, especially the electrochemical type, which have a limited service life.

The magnitude and dynamics of changes in the sensitivity of electrochemical sensors largely depends on the operating conditions of the instruments and, first of all, on the concentrations of the measured components. Therefore, changing the readings of instruments of the same type at the same operating time, but under different conditions, can differ substantially.

Realizing that one of the main criteria for consumers, after the purchase of devices, remains the preservation of a high degree of reliability of their indications, the laboratory "ROSFLOTERVICE" carefully approaches the calibration process. It is carried out by our specialists at the last stage of maintenance with the help of verification gas mixtures 0 and 1 digit accuracy, which guarantees the subsequent successful passage of periodic state verification by the device.

Technical personnel performing work on calibration and testing of gas analyzers constantly undergo advanced training courses at the enterprises of leading manufacturers of gas analyzers, such as "MSA", "DRAGER", "ANALITPRIBOR", "INSOVT".

In the warehouse of the laboratory is constantly maintained in the presence of the necessary number of sensors and batteries for gas analyzers.

13.01.2017
Checking and calibration of gas analyzers any types and models

11.01.2017

Test of Liferafts in natural conditions

Test of Liferafts in natural conditions

Import substitution continues.

A pilot lot of life rafts for the Requirements of the Russian Maritime Register of Shipping (RMRS) was developed and manufactured by the Russian company of the manufacturer of rescue inflatable liferafts of RPE "DANA" in Ufa, and tested under natural conditions, sea waves, storms in accordance with the Recommendations of the Resolution IMO MSC 81(70).

As a result of the test, the liferafts meet the Requirements of the RMRS of the Rules for the Equipment of Sea-going Ships, the International Code for Life-Saving Appliances (LSA Code), the Technical Regulations for the Safety of Maritime Transport Facilities.

RPE "DANA" received the approval of RMRS for the production of these types of liferafts.

The Marine Service Station LLC "ROSFLOTSERVICE" was the first in the Azov-Black Sea basin to receive the recognition of the manufacturer for the right to conduct maintenance and inspection of these liferafts and components to them at a service station in the city of Novorossiysk.

Russian manufacturers of life rafts:

1. JSC "UZEMIK", the city of Ufa

2. LLC RPE "DANA", the city of Ufa

3. CJSC YAROSLAVL-REZINOTEHNIKA, the city of Yaroslavl

LLC "ROSFLOTSERVICE" has authorization from all the above-mentioned Russian manufacturers of life rafts and are ready to conduct a survey of rafts at any time convenient for the customer.

We work for you 25 hours a day.

11.01.2017
Test of Liferafts in natural conditions

05.01.2017

Yacht program

YACHT PROGRAM AND SPECIAL ANCHOR-WARD EQUIPMENT

Yacht program and special anchor and mooring equipment Adria Winch has more than 20 years’ experience in the design and manufacture of winches and equipment for yachts and special vessels. Over time, we developed three product groups:

STANDARD WINCHES INTENDED FOR SMALL SHIPS

The group contains 12 models of 3 power groups - 500W, 800W and 1000W

TECHNICAL INFORMATION:

Vessel’s dimensions

6-14 m

Chain caliber

6-10 mm under DIN 766

Drive

Electrical

Power supply

12 V or 24 V direct current - accumulator

STANDARD WINCHES INTENDED FOR YACHTS AND SPECIAL SHIPS

The group contains 5 types of winches - 2 models with a vertical shaft and 3 models with a horizontal shaft.

TECHNICAL INFORMATION:

Vessel’s dimensions

12-45 m

Chain caliber

10-18 mm under DIN 766 and 12.5-23 mm stud chain

Drive

Electrical/Hydraulic

Power supply

24 V direct current and 3 x 380 V alternate current

WINCHES AND EQUIPMENT MANUFACTURED ON ORDER

Thanks to this program, we can meet the special requirements of the customer. As a rule, these are individually developed products. The products are designed and developed in accordance with special technical requests, in cooperation with the designers and ship owners.

TECHNICAL INFORMATION:

Vessel’s dimensions

15-80 m and more

Chain caliber

12.5-66 mm

Drive

Electrical/Hydraulic

Power supply

3-phase, 400, 440 and 460 V

Such winches and necessary equipment are installed on large yachts and vessels of a specific purpose - in both cases, winches are used in civil shipbuilding and for ships serving naval forces.

GENERAL PERFORMANCE AND REMAINING CHARACTERISTICS

All the winches are the result of our twenty years of experience and development of Adria Winch. The whole program is implemented according to the rules of marine classification societies.

The coordination of the documentation, the certification of materials and components, the monitoring of production and the delivery tests are carried out as necessary under the supervision of the classification society. Winches are supplied with an individual certificate of the classification society.

The products are approved by the Croatian Shipping Register, Lloyd's Register, Det Norske Veritas, Beureau Veritas, the Russian Maritime Register of Shipping and the Russian River Register.

Winches are designed to work with one or two anchors at the same time and allow mooring operations by horizontal or vertical turbochairs. The execution of the winches, the number and position of the chain sprockets and turrets can always be adjusted at the customer's request.

The transmission of anchor and mooring winches is specially designed in Adria Winch. All gearboxes have a high permissible load, an optimum speed-traction ratio and minimum power consumption. The gear elements are made of the best steel and bronze with increased mechanical properties and with careful and accurate processing of the gears.

The materials used ensure stability, reliability, long service life and wear resistance. Protection against corrosion is achieved through proper protection of parts during assembly and selection of the best materials. At the request of the customer, all deck work pieces can be made of stainless steel or anti-corrosion alloys, polished and / or chrome plated or anodized.

The production has a certificate of quality assurance system in accordance with ISO 9001/2000.

The concept, formation and selection of the material ensures a long period of use of the equipment without failing it with guaranteed terms from 1 to 5 years.

Buyers are provided with constant after-sales support. The replacement of components, maintenance, in our company is always available for all models, without taking into account the warranty period or the date of production of equipment.

05.01.2017
Yacht program

05.01.2017

Davits, Launching Gear of boats and Lifarafts, Ship cranes

Davits, Launching Gear of boats and Lifarafts, Ship cranes

Our partner, "ADRIA WINCH Zelenodolsk" produces Davits, Launching Gear for lifeboats and Liferafts, Ship cranes of various types.

All equipment is designed, manufactured and tested in accordance with the Requirements of Classification Societies and meets the highest criteria.

Our great practice and the latest achievements of CAD / CAM, which are used in the design, allow us to meet your requirements and fulfill the necessary type of equipment that meets your wishes.

The davits for high-speed lifeboats are designed, manufactured and tested in accordance with the IMO resolution and the rules of the SOLAS Convention.

05.01.2017
Davits, Launching Gear of boats and Lifarafts, Ship cranes

22.12.2016

A certificate has been obtained for the right to re-inspection inflatable liferafts produced by "UZEMIK" (Russia)

A certificate has been obtained for the right to re-inspection inflatable liferafts produced by "UZEMIK" (Russia).

A service agreement with the Russian manufacturer of inflatable liferafts of JSC "UZEMIK" was signed, the audit and certification of the service station LLC"ROSFLOTERVICE" for compliance with the requirements of the IMO Resolution, the LSA Code for carrying out annual survey, re-inspection and supply of liferafts produced by JSC "UZEMIK" (Russia, Ufa city).

Based on the results of the certification of service station LLC "ROSFLOTERVICE", a registered Certificate is given that gives the right to conduct service works with liferafts of this types and issue electronic certificates of annual inspection of liferafts.

We work for you 24 hours a day.

22.12.2016
A certificate has been obtained for the right to re-inspection inflatable liferafts produced by "UZEMIK" (Russia)

16.12.2016

Replacement of the "KODEN" radar at the crane "A.CHERNOUSOV"

Replacement of the KODEN radar at the crane "A.CHERNOUSOV"

Development and approval of the project for the replacement of old ship radar at the crane "A. Chernousov", installation and commissioning, acceptance work have been completed in full.

A contract for full service has been signed.

16.12.2016
Replacement of the "KODEN" radar at the crane "A.CHERNOUSOV"